Date:         Wed, 17 Mar 1999 19:11:32 -0500
Reply-To:     Tim McDermott <mcdermot@LI.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Tim McDermott <mcdermot@LI.NET>
Subject:      Re: Wolfsburg parts into regular Vanagon?
Content-Type: text/plain; charset="us-ascii"

I have done this swap twice.
The original seat will NOT fit if you put in the panel with the popup table.
You need to get the seat from the vehicle that you got the table from.
You will probably want to replace the plastic piece on the passenger side of
the van so it matches.
If you have the correct parts it should only take an hour or two.

Good Luck.
Tim McDermott
Bay Shore NY

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.