Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (March 1999, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 16 Mar 1999 08:16:02 -0600
Reply-To:     Thomas Czerniak <raritat@MEGSINET.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Thomas Czerniak <raritat@MEGSINET.COM>
Subject:      Re: what is a 17mm "socket tool"???
Comments: To: akimmons@PDQ.NET
Content-type: text/plain; charset=us-ascii

If you have purchased the 17 MM allen wrench then consider doing this: I cut approximately 1 inch off the short end of the L and use that piece to get into the space that is between the exhaust and the plug . Take a look at the distance and figure out just how much you will need. Then from here on out you have your special 17 mm front drain plug tool and it will work on any VW or Audi transaxle drain plug. You will still have a viable tool with what is left of the allen I know that this is not optimal,I would rather not cut up a new tool but I have not found a separate allen tool for this application. I used a hacksaw to cut the allen . Take your time and try to make a nice straight cut. I might get flamed for cutting a tool but I have never used the 17 mm allen for anything other than transaxle drain plugs and now I have exactly the tools that work for what I am trying to do. Good luck! Tom Czerniak Lurker at large! 87 Westy


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.