Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (March 1999, week 5)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 31 Mar 1999 21:29:16 +0000
Reply-To:     "A. Kimmons" <akimmons@PDQ.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "A. Kimmons" <akimmons@PDQ.NET>
Subject:      the 'other' fuel lines
Comments: To: Odyssey Stickers <odyssey@SLIP.NET>
Content-Type: text/plain; charset=us-ascii; x-mac-type="54455854";
              x-mac-creator="4D4F5353"

So...on that topic... Can the fuel line above the fuel pump be a regular fuel line or is this a metric high pressure also. I did the same job as you and replaced only the 'engine box' lines and to the pump also. Did change the small pieces next to the injectors. Well worth the money from what stories I've heard on this list! Would like to know for sure about the 'other' fuel lines...including the ones to the plastic vent tanks also. Do these ever contribute to the fire problems? I didn't change these but it's on my list... Thanks Tony

Odyssey Stickers wrote:

> ---------- > >Anybody have any ballpark estimates on what it should cost to have a > >non-dealer vw mechanic replace all the fuel lines in an 89 vanagon? I've > >asked for an estimate from a local vw mechanic that I've never dealt with > >before, and I'd like to see if it is close to what other people have paid > >for the same job. > > > >Thanks, > > > >Steve > > > Steve > > I replace all of the gas lines in the engine compartment for under $40, a > guess it was a month or two ago. > > I found that the 7.9 mm is a bit easier to fit onto the fittings than the > 7mm, even the 7.9 will be tight here and there (the t near the oil breather > for example) This high pressure fule line is $2.99 a foot and the hose > clamps for fuel inj. are $2.99 for 4 at your basic parts store. I did not > replace the small lines going from the fuel rail to each injector, but I do > have extra hose/clamps if it starts leaking. I only did up in the engine > area. it's plastic from there to the fuel filter then it seems like the > diamater of the line gets larger from the filter to the gas tank. > > You can do it. > Good luck > Rob


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.