Frank Condelli wrote: > My '87 Westy's upper contril arm bushings are loose, well just one is > actually, on the right side, the front most one. My question to all of you > is this. I installed new upper control arm bushings in September of 1995 > at 178,200 km and now at 263,000 km one is loose again. Is 85,000 km a > normal life cycle for these bushings ? I know this applies to other cars so probably applies to our Vanagons; when torqueing the control arm make sure the van is properly loaded. Easiest way is to put the wheel back on, pile a bunch of people in the van, then torque to spec. This puts the right squishes in the bushing for proper life expectancy. eric.henning@bailey.com 80 westy |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.