did you spot weld it after installing it? not doing so will cause premature wear. ----- Original Message ----- From: Frank Condelli <ad793@FREENET.CARLETON.CA> To: <vanagon@GERRY.VANAGON.COM> Sent: April 12, 1999 2:32 AM Subject: Upper Control Arm Bushings
> My '87 Westy's upper contril arm bushings are loose, well just one is > actually, on the right side, the front most one. My question to all of you > is this. I installed new upper control arm bushings in September of 1995 > at 178,200 km and now at 263,000 km one is loose again. Is 85,000 km a > normal life cycle for these bushings ? Should I change all of them or just > the one that's loose ? I was installing my new KYB shocks that I got from > The Bus Depot on Saturday when I found this out. Never a dull moment when > You own a Vanagon ! > > Cheers > > Frank > > > -- > * Frank Condelli * Almonte, Ontario, Canada * > * ad793@Freenet.carleton.ca * > '87 VW Westy, '69 MGB & Lionel Trains > http://members.aol.com/RAlanen/index.html > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.