Date:         Sun, 11 Apr 1999 12:58:19 -0400
Reply-To:     Dave C <cdcaston@NNI.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dave C <cdcaston@NNI.COM>
Subject:      SA grille owners only question
Comments: To: vanagon@onelist.com
Content-Type: text/plain; charset="us-ascii"

Recently got my SA grille and was wondering about the durability of the
mounting studs. Unlike the stock grille, these have studs with no screw to
turn and release. Thus, when I put the grille on for a quick look it was
trying removing the thing! I was worried that I was gonna pop one of the
studs off.
So, what do others with this grille do to remove the grille with the least
amount of stress to the mounting studs?

One can mount the driving lights by drilling the holes close to the front
of the van or further rearward about 3/4" to 1" inch. So, where did you
mount your driving lights?
Further back in the recess or further forward in the recess?
Does it really matter?

Has anyone running 100watt bulbs had any trouble with heat buildup around
the drivers side driving lamp melting any wires?
And did you do anything interesting to route wires behind the driving lamp
(again drivers side)?

Thanks,

Dave & Sherrie
Allentown,PA
           zzzzzzzzzz__
         |E[__] [__]|[_]\\
         | _DC&SP | _ ||
* * * =-( )---------( )--=