Whoever packaged it, screwed up. You only need one. Eric 86-VW4x4 vw4x4@fyi.net 72-240z Pittsburgh, PA USA 1936-Chrysler
On Thu, 15 Apr 1999, Per Lindgren wrote: > Listees, > > Today, I bought a balljoint to replace the worn out unit at the upper > left position on my '88 Syncro. I didn't get a VW unit, but a TRW. The > thing that puzzles me is that, included is two hex bolts for the > wishbone control arm, so far all ok. Also included was two locking nuts, > but AFAIK i need only one to mount the joint to the spindle? Why is two > included? Is it just a spare for the lower joint, if you need to remove > the entire steering knuckle? Any opinions would be helpful. > Now, you can all guess what I'll be doing this weekend > > PerL > 88 Syncro > Arendal, Norway > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.