Pollard, Matthew wrote: > I have a small (1/8" diameter) exhaust leak; which epoxy do I use to patch > it? I don't have access to a welder, so that is out of the question. Matthew, Any epoxy fix is a -short, short- term fix. the best high heat epoxy's will melt, (de-catalyze) in the neighborhood of the high 300's in F degree temps. This is why their are presently no composite exhaust systems, they can't take the heat of engine exhaust. You can use those muffler epoxy "bandage" kits they sell, but it will only hold for a while as the heat decatalyzes the epoxy, and the pressure blows the bandage through. Better to hose clamp on a piece of sheet metal. Best is a new component for the one that failed. This will be your only long term solution. ><> ><> ><> ><> ><> ><> ><> ><> ><> Shalom 87 GL Mark Magee 91 Westy Kemah TX USA 96 Suzuki 4WD Sport John 14:6 |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.