Date:         Sat, 17 Apr 1999 09:22:27 -0700
Reply-To:     Steve <Steve@SCHWENK-LAW.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Steve <Steve@SCHWENK-LAW.COM>
Subject:      Re: [Fwd: Westy Front table survey--solution to loose R. table]
Comments: To: Holm <vholm@WEREWOLF.NET>,
          "vanagon@vanagon.com" <vanagon@vanagon.com>
Content-Type: text/plain; charset=us-ascii

Better yet, just stuff a roll of paper towels under there and make sure th knob
is tight.

Holm wrote:

> I have struggled with this problem as well... my solution: buy a pack of
> cheap bungee cords (about 12" long). Secure one end on the knob under the
> table and the other end hook on the vent from the 'frig. Works quite well
> and is a cheap solution.
>
> -----Original Message-----
> From: Thomas Czerniak <raritat@MEGSINET.COM>
> To: vanagon@GERRY.VANAGON.COM <vanagon@GERRY.VANAGON.COM>
> Date: Saturday, April 17, 1999 7:28 AM
> Subject: [Fwd: Westy Front table survey--solution to loose R. table]
>
> >JordanVw@AOL.COM wrote:
> >
> >> In a message dated 4/16/99 2:29:59 PM Eastern Daylight Time,
> >> pbouton@NACCHO.ORG writes:
> >>
> >> << As for a solution to the rear table swinging out-I simply adhered
> >> heavy-duty
> >>  Velcro near the ends on the side of the table and matching places on the
> >>  wall.  This has ended all creeping by the table!
> >>   >>
> >>
> >> what about just tightening the knobs???   ;<)
> >>
> >> chris
> >
> >Since I've done this and it has no effect ,I was wondering if I could call
> >you ,and have you come along with me every time I use the rear table and
> you
> >could hold it there securely against the wall and also regale me with all
> of
> >your Vanagon knowledge?  ; > )  Sorry for the late Friday post!
> >Tom C.
> >