Date:         Wed, 21 Apr 1999 07:51:54 -0400
Reply-To:     "Horace K. Sawyer" <firestream@MINDSPRING.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "Horace K. Sawyer" <firestream@MINDSPRING.COM>
Subject:      Re: small exhaust leak: which epoxy to use?
Comments: To: "Mark B. Magee" <condor2@FLASH.NET>
In-Reply-To:  <371B9F85.D769DB25@flash.net>
Content-Type: text/plain; charset="us-ascii"

I have successfully used 'JB Weld' for this application for years with
success.  Even with larger holes.  If the 'weld' tries to slip inside the
hole, cover the hole with a piece of masking tape just large enough to
cover the hole.  Then coat the area with JB  Weld.  Let dry for 24 hours,
its good to go.  You can expand your uses of JB Weld for almost anything.
It is great stuff!

In my Dodge Cummins repair manual, it even lists JB Weld as an application
for use in field operations in third world countries where parts are scarce
. . .

HKS