Date: Wed, 21 Apr 1999 17:26:55 +0100
Reply-To: William Todd <WT@ISCNET.CO.UK>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: William Todd <WT@ISCNET.CO.UK>
Subject: Re: [Syncro] Viscous Coupling survey
Content-Type: text/plain; charset="iso-8859-1"
I guess this could be down to the fluid level in the viscous...
> -----Original Message-----
> From: Brent Christensen [SMTP:bpchristensen@mindspring.com]
> Sent: 21 April 1999 16:17
> To: Syncro@onelist.com; Vanagon list - post
> Subject: [Syncro] Viscous Coupling survey
>
> From: "Brent Christensen" <bpchristensen@mindspring.com>
>
> I think it would be interesting to see how many of the Syncros out there
> will idle freely at 1,000 rpms with the rear wheels spinning in the air
> and
> not engage the front wheels. If you have a Syncro and a floor jack with
> wheels it is a relatively simple test. If you have time, please try it
> and
> report back to the list.
>
> My Syncro will engage the fronts at the full 800-1,000 rpm idle speed,
> but
> if I slow the rear wheels down a bit using the hand brake, then the fronts
> will disengage. I wonder if my VC is toasted... ???. (The fronts grab
> while making sharp turns in parking lots, but don't seem to act up at
> "road"
> speeds.
>
> Brent Christensen
> '89 GL Syncro Westy
> '91 Taurus SHO (For Sale)
> '95 Cherokee Sport
>
> ----- Original Message -----
> From: Dr. Rainer Woitok <woitok@rrze.uni-erlangen.de>
> To: Joel David Shortlidge <shortlid@expert.cc.purdue.edu>
> Cc: Steve <Steve@Schwenk-Law.com>; <wt@iscnet.co.uk>; <Syncro@onelist.com>
> Sent: Tuesday, April 20, 1999 3:55 AM
> Subject: [Syncro] Re: Viscous Coupling
>
>
> > From: "Dr. Rainer Woitok" <woitok@rrze.uni-erlangen.de>
> >
> > Joel and all others,
> >
> > On Mon, 1999-04-19 15:55:41 -0500, Joel David Shortlidge wrote:
> >
> > > ...
> > > How can you tell your VC is frozen???
> >
> > VW's original (German) repair manual doesn't say much about how to test
> > the viscous coupling. They only recommend placing the rear wheels in a
> > break testing stand. If you then switch to the G-gear (creeping gear),
> > the front wheels should move the van out of the test stand as soon as
> > the engine is revving slightly above idle. If the front wheels fail to
> > do so the viscous coupling is to be replaced, VW says. VW adds another
> > tiny sentence to this, saying that only when the engine is revving at
> > idle and with the G-gear switched in, the viscous coupling is able to
> > absorb all the torque to the front wheels and keep them from moving.
> >
> > To me this last and rather ill-formulated (in the German manual)
> > sentence is the key to testing the viscous coupling. For in most cases
> > we are not dealing with viscous couplings doing less than their share,
> > but rather with hard-going viscous couplings which don't have a problem
> > at all in moving the van out of the test stand with the engine just
> > idling.
> >
> > Thus the really important thing here is not the van successfully leaving
> > the test stand. On the contrary, the important thing here is the van
> > not moving and staying put in the test stand with the G-gear switched in
> > and the engine just idling. If your Syncro doesn't pass this test your
> > viscous coupling is probably worn out and ready for a replacement. Or
> > put the other way round: as long as your van's viscous coupling is
> > working properly you will not notice your van has got one.
> >
> > As soon as you are encountering problems with your Syncro when
> > cornering, in particular after a long and fast drive, or as soon as --
> > despite of power steering -- steering becomes a bit difficult when
> > turning and the Syncro slows down considerably when going round a corner
> > ... as soon as one or more of these things are happening, your viscous
> > coupling is most probably due for replacement. When the tires start
> > whining while cornering it might well be too late already ...
> >
> > Hope this helps.
> >
> > Sincerely
> > Rainer
> >
> > '89 Caravelle GL Syncro 16"
> >
> > ----------------------------------------------------------------------
> > | Rainer M Woitok | Phone: (+49-9131) 85-27811,-27031 |
> > | Regionales Rechenzentrum | |
> > | Friedrich-Alexander-Universitaet | Fax : (+49-9131) 30 29 41 |
> > | Martens-Strasse 1 | Telex: d 629 755 tf erl |
> > | D-91058 Erlangen | |
> > | Germany | Mail: Woitok@RRZE.Uni-Erlangen.DE |
> > ----------------------------------------------------------------------
> >
> >
> > ------------------------------------------------------------------------
> > You can now easily share photos and documents with your fellow list
> members
> > http://www.ONElist.com
> > Check out our homepage for details on how to use our new shared files
> feature!
>
>
>
> ------------------------------------------------------------------------
> Did you know that knowledge is power?
> http://www.ONElist.com
> Join a new ONElist e-mail community and strengthen your mind!
|