Stuart MacMillan wrote: > Only a bumper made of quarter inch > thick steel channel would have prevented the $800 worth of damage Stuart, I found that bumper at the pick 'n pull. It's 5" high and 2" deep. The channel was welded to the original bumper mounts, and the ends had little flat pieces welded on to roughly match the original bumper. It now graces the back of my Westy, and it even has a hitch ball mounted on a small flange. Larry |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.