probably wrong hi-pressure sensor installed, (one near the oil pump). Should be .9 bar. Both VW microfiche and most after-market parts books list the 1.8bar as used on Golf-Jetta engines. Will not work. Dennis -----Original Message----- From: Graham Benoit <graham@IC.OWATONNA.MN.US> To: vanagon@GERRY.VANAGON.COM <vanagon@GERRY.VANAGON.COM> Date: Friday, April 23, 1999 12:56 PM Subject: Oil pressure warning buzzer on 1986L
>Has anyone had a problem with the oil pressure warning system on a 1986L? My >mechanic has replaced both sensors and the dashboard warning device. It still >goes off when at normal speed? Oil pressure was checked at shop and seemed >normal. >Suggestions or advice would be appreciated by the mechanic and myself. > >thanks, > >Graham |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.