Noto-Gaudette wrote:
> my mechanic (a VW specialist w/whom I have no experience) is suggesting a > combination of hoses and copper pipes, which he says are "used on > trucks." ... Your thoughts? This is about what I did when my pipes rusted through. It works fine and will be easy to replace next time, without dropping the fuel tank. I used 1.25'' heater hose to replace the pipes, with a piece of copper tubing to connect to the engine outlet hose. This size heater hose is unusual, but I had no trouble finding it. Apparently this is a common size on trucks and tractors. Better than the copper tubing would be 1.25" heater hose couplings, but they were out of stock when I made my purchase. Mike <mjcatlin@pacbell.net> Davis, Calif. '82 Vanagon diesel |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.