Subject: electronic cleaners/AFM cleaning I agree with you Alistair... Isopropanol is an ideal cleaner with almost zero residue, but getting it to spray hard and fast makes it difficult to apply and a second in choice... A can spray of QD Electronic cleaner with a straw (like WD-40 uses) applies so easy without touching any parts, which means you don't leave any body oils on electronic parts... I don't know it's your van, your parts, your call ... G'DAY, Mtngal :0)
{Referring to comment made earlier about shammy: if you are using a Q-tip on the heads in your VCR you are risking a scratch on the heads} | You know, good old 95% ethanol or 95% isopropanol works real well as a | cleaner for the carbon track/copper arm assembly in the AFM |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.