Date:         Tue, 4 May 1999 15:21:50 -0400
Reply-To:     Tom Carrington <tcarrington@RELITECH.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Tom Carrington <tcarrington@RELITECH.COM>
Organization: ReliTech, Inc.
Subject:      Re: Fw: Heeeellllppp!!! (trans/final drive)
Comments: To: Jed Thompson <sk8487@EMAIL.MSN.COM>
Content-Type: text/plain; charset=us-ascii

Don't bother pulling the pan from the tranny. It sounds like a CV-Joint
had broken, or the bolts that secure the CV joint to the drive flange
fell/stripped out.




Jed Thompson wrote:
>
> Ok I was drving along today in my 80 westy automatic when I start hearing
> this clunking sound that is dependant of speed... about 2 miles later there
> is a huge bad sound and I am forced to coast into a parking lot.  I got
> under the van and the left drive shaft is very misaligned and now moves all
> over the place in every direcion. When I start the motor and put it in gear
> i get a loud crashing/clanging/banging/expensive sound. I'm going to pull
> the pan off the bottom of the final drive tomorrow to see what I can see but
> I don't really know what I'm doing or what it could be. Im hoping its just
> the CV joint or something else easy and cheap.  It just seems odd that i get
> clanging whenthe van is in gear but I'm not moving.

--
TomC
tcarrington@relitech.com
http://www.relitech.com/tomc/tomvw.htm
85 Vanagon Crew Cab
82 Vanagon Westy diesel=>gas conversion
65 Notchback