Hello, I have followed oil filter testimonials and experiments on this list and in the media for years. While I understood that a better filter is a good thing, I couldn't figure out which filter was "better." This note is about a specific observed failure. A short time ago, I noticed bearing knock for a second or two just after starting my Vanagon after not using it for 10 hours or more. I immediately suspected the anti-drainback valve in the oil filter. I changed the oil filter Saturday, and after the usual startup and check for leaks, the Vanagon sat until this morning. No bearing knock on startup. I looked at the used filter, and I understand how the anti-drainback valve works, but I couldn't see any obvious physical problem with it. The famous Mopar oil filter study says to expect this failure from a Fram (yes it was), but I don't see how the Fram design is flawed other than the valve flap is a cone shape rather than flat as it is in other filters. (I disregarded the "rough metal backplate" words since the plate referred to looks the same as used in other filter brands.) Thanks for listening. Mike '84 GL '58 Isetta |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.