I was too lazy to go up to the dealer to get this fixed (time and distance) and I had some spare heavy duty plexiglass lying around, so I did the fix myself. Just craft some wide spacers to go between the bolt and the duct to take the load off the duct. The b*tch is getting those little plastic seals to go back in between the duct sections. Oh, and putting all the sections back together because the most difficult one (the front) goes on last. Joachim 90 Vanagon GL 78 Scirocco |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.