Date:         Sun, 16 May 1999 09:31:35 EDT
Reply-To:     KGGILBERT@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Kevin Gilbert <KGGILBERT@AOL.COM>
Subject:      Re: Ceramic coolant sealer
Comments: To: bloss@enter.net
Content-Type: text/plain; charset="us-ascii"

As I recall, the Moroso sealer is a bit more involved than "dump and forget."
You must drain, flush, repeat, fill with water and the sealant, circulate,
then drain, flush, repeat 24 hours later. Last is to fill with proper coolant.
After buying Moroso, I decided to bite the bullet and have my head gaskets
replaced tomorrow.
You are welcome to my bottle of the stuff at half what I paid (was @$15).
Kevin

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.