Date: Thu, 20 May 1999 19:36:49 EDT
Reply-To: Ssittservl@AOL.COM
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: S Sittservl <Ssittservl@AOL.COM>
Subject: Fridge fan and water behind the fridge
Content-Type: text/plain; charset="us-ascii"
I've removed my not-terribly-cold fridge from the Westy, and
(just like everybody else) my fan is broken. I figure I've got
two choices: replace the motor (which is the broken part), or
replace the whole fan.
I checked with the local RV place on ordering a new fan motor
from Dometic. It's $35 - pretty high for a part that's about $2.99
in an electronics catalog. So, I won't be ordering from Dometic.
I can get little 12V motors locally or mail order, but I'm not quite
sure exactly what I need. In particular, does anyone know how
many RPM's the motor ought to run at? Replacing just the motor
has the advatage that I don't have to modify the mounting bracket,
plus, I assume Dometic's original fan was at least adequate, so that
gives me some assurance that my result would be at least adequate.
The other option is to replace the whole fan. The current option
is a little 3" muffin fan from Radio Shack, or something similar.
It blows 27 cubic feet/minute. Does anyone know how that
compares with the original fan? Also, I of course want the fan
to be quiet. Does anyone have a sense for how the noise of these
fans compare with the original Dometic fan, or how noisy
the Dometic is? I know that's pretty subjective, but is the Dometic
(when working) more like a whisper, or more like a box of bolts
tumbling down the stairs?
Second issue: also like everybody else, I found that the insulation
behind the fridge was wet, and there was water and rust in the
trough there between the wall and floor. My plan at this point is to
have Ziebart remove the loose rust, magically turn the rest into metal
(with rust convertor), and coat the trough with their waxy rust preventer.
They'll do it for about $30. (I wouldn't generally treat a car with Ziebart -
I hear it often does as much harm as good - but this limited application
seemed to make sense.) My question is, does anyone have any
suggestions for preventing water from collecting there or soaking the
insulation in the first place? I suspect the water is a combination
of condensation from the fridge, and water dripped down through
the vent slots, but I don't know for sure.
Thanks.
-Steven Sittser
|