Have you tried J-B Weld? Works fine filling in the pits in the head itself when doing gasket jobs, may work just as well on your problem. Maby "J-B Welding" one of those copper washers to the head? That way when you torque the head the copper washer takes most of the "twist strain" and not the J-B Weld. Just a thought.
----- Original Message ----- From: Joshua Van Tol <jjvantol@USWEST.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Monday, May 24, 1999 1:55 PM Subject: waterboxer head nuts leak
> Does anyone have suggestions for stopping 1.9 liter waterboxer head nuts > from leaking? I have a presistent problem with two of them. > > I've tried the standard vw sealing compound, silicone, head gasket sealant, > and even, most recently, copper sealing washers. Nothing has worked. > > The sealing surface on the head is a bit scarred up, which probably > accounts for the problem. So, any suggestions? I'm thinking of trying some > permatex 3H on the nuts. > > My only other recourse, as far as I can tell, is to remove the head, and > have the sealing surfaces remachined. > > Joshua Van Tol -- jjvantol@uswest.net |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.