> The Sensor I have in the van differs slightly from the one I > purchased. The new Sensor has a more modern looking > connector, shaped like a ciggarette lighter > Both sensors have 3 wires each (2 white, one black), and the > same part number on them. > 1. Are these interchangable sensors or am I risking damage by > using my new one? > 2. How do I splice the wires on these suckers.... how do i > know which white wire on one sensor goes with which white > wire on the other sensor?
The two white wires are interchangeable, and black goes to black. Best is to cut the connector off of your old 02 sensor and simply splice it onto the new one. - Ron Salmon The Bus Depot, Inc. http://www.busdepot.com (215) 234-VWVW |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.