Thanks, David. Your suggestion worked nicely. My Syncro Camper measured 10 1/2 inches, with a possibly less than perfect seal. The Dometic manual calls for 11 inches of water. Tomorrow I will test the Westy that does not cool quite as well. If it is out of spec, I will try the adjustment screw. Mark David Beierl wrote: > > At 18:34 5/22/99 -0700, Mark Drillock wrote: > >know how I can measure the pressure of my regulators? I have a Westy > >with the original regulator that does not cool nearly as well as my > >Camper with the new type of regulator. I would like to compare the > >pressures to see if this is the reason. > > There may be an expensive professional method -- but if you make up a piece > of clear tubing in a U shape two or three feet high and apply the gas to > one end, the difference in height btw the two water columns is the answer. > > david > David Beierl - dbeierl@ibm.net |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.