Date:         Mon, 24 May 1999 23:52:40 -0600
Reply-To:     Carl Hansen <carl_hansen@IEEE.ORG>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Carl Hansen <carl_hansen@IEEE.ORG>
Subject:      I have 3 jacks.  read on
Comments: cc: jonathanrcooper@WORLDNET.ATT.NET, hbernier@mail.mc.net,
          bchristensen@rock-systems.com, Syncro Shocks - Steve
          <Steve@Schwenk-Law.com>
Content-Type: text/plain; charset="us-ascii"

I have 3 (three) Jacks up for grabs:

Jack #1.  Says "Bilstein", Stamped flat Steel, handle is Stamped Steel and
is fixed such that it will ONLY rotate.

Jack #2.  Says "Bilstein", round steel, needs lug nut wrench to actuate.
Rubber bumper at top where Jack rests on body.

Jack #3.  No name, looks like Bilstein Jack #2, needs lug nut wrench to
actuate.  Rubber bumper at top where Jack rests on body.

None of the three jacks have any additional tools.  Jacks #2 and #3 may be
Loaf Jacks, but certainly will work with the Vanagon.  They are the same
length as the Jack in SyncroBeast, the only one I know the real vintage of.
The only difference that I can tell is that the top of Jacks #2 and #3
rests against the body when you jack up.

$10 dollars per Jack, plus Shipping will cost $5 to $10, depending on where
you live.  I am midway between both coasts in Minneapolis MN.
********************************************************************

The first 3 e-mail respondents I open get a jack in order, #1, #2, #3.

Let the race begin!


on-on

Ch
'89 SyncroBeast Vanagon - Soon to come - New Shocks for the Syncro!
'87 16V GTI
'80 850 Yamaha Special
'87 16V GTI w/ hale damage - parting out - body gone, parts remain
'89 16V GTI w/ toasted motor
'86 Scirocco (8 valve w/ auto) - SO's - now w/ it's own hale damage

Prior Lake, MinneSnowta  -  umm, ok, summers coming
(SW suburb of Mpls.)