Date: Thu, 3 Jun 1999 13:40:14 -0500
Reply-To: Darrell Boehler <midwesty@MIDWEST.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Darrell Boehler <midwesty@MIDWEST.NET>
Subject: Re: R134 conversion.
Content-Type: text/plain; charset="iso-8859-1"
Hi Mike,
One of the list mechanics wrote this up last year and I thought he was
dreaming or on wacky weed. However since cleaning the evaporator and
condenser and switching to r134a my numbers are right on with his and my 86
westy runs right down there with the best of them. I am a believer. I will
include his note from last year and since Michael Modl is a great guy I
don't think he will mind.
Darrell
85 Westy-Bastet >>
Hi John, it should be cooling between 40 to 48 degrees, depending how hot it
is. Your tech should be seeing a pressure on the high side of about 150 to
275 lbs, and on the low side about 25 to 40 lbs. If the pressures are even,
then you need an expansion valve, 4 hrs labor plus parts. If the pressures
are good, then with a small pin light check what color the freeon is inside
the sight glass of the reciever drier. If it's rusty brown color, than you
need reciever drier. If you are going to replace the drier, than this would
be the time to convert to R134. It will be cheaper to convert than stick
with
R12. Let us know what happens.
Michael Modl
87 syncro
87 quattro
----- Original Message -----
From: Mike Finkbiner <mike_l_f@HOTMAIL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Wednesday, June 02, 1999 2:18 PM
Subject: Re: R134 conversion.
> Richard Golen wrote --
>
> >I just did the conversion to my son's 84 GL. Picked up the kit for
$39.95,
> >a can of stop leak/leak detector for another $4.00. Total time to attach
> >fittings and recharge, etc. under 40 mintutes. The kit had three cans of
> >refrigerant and a can of oil..used all three cans and the oil. I'll
> >probably add one more can of refrigerant for good measure.
> >
> >
> >Ric
> >
>
> Volks -
>
> Is there any consensus on the air temperature you should get out of the AC
> system on a warm day? I couldn't find a spec in Bentley.
>
> I borrowed a good thermometer from an HVAC tech at work to check my '87
> Westy. The day was just over 70, it was mid to late afternoon, with
> scattered clouds, so with the windows rolled up it got pretty warm inside.
>
> With the AC control set on max, and the fan speed on 2, I plugged the
> termometer into one of the middle vents. The temperature started about
80F
> and then went down to 52.4 after a few minutes. It stayed there as I
drove
> around.
>
> When I turned the fan up to 3, the temp went up to 59F, not too surprising
> as it was trying to cool a greater volume of air. I didn't try it on 4.
In
> neither case did I feel completely cool in the front seat.
>
> I'm not interested in retrofitting to R134 yet, but as I plan to run the
> vehicle for a good many years, I wanted to think ahead. Some of the
> information I have gotten indicates that you might lose some capacity when
> you switch.
>
> People on the list have indicated output temperatures from 45 to 55.
Should
> I be getting closer to 45? If so, does it sound like I should check and
see
> if my freon level is low? That seems like the most likely reason for
> reduced performance.
>
> Has anyone measured the temperature before and after window tinting?
>
> Thanks
>
> Mike Finkbiner
> '87 Westy
>
> PS - Several people have been kind enough to write me about other
problems,
> and I am really grateful to them, but I have a question about nettiquette.
> When I have responded to people with questions about the few things I know
> about, I have either responded to the list, or if it wasn't of general
> interest, as p-mail.
> Some people who have written to me have done both p-mail and a list
posting.
> Is that the preferred method?
>
> Tanks - MLF
>
>
> _______________________________________________________________
> Get Free Email and Do More On The Web. Visit http://www.msn.com
>
|