Date:         Wed, 2 Jun 1999 23:23:49 -0400
Reply-To:     Shortlidge D Joel <shortlid@JUNO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Shortlidge D Joel <shortlid@JUNO.COM>
Subject:      Re: mounting doo-dad for armrest
Content-Type: text/plain

I need some of these bolts that attaches the plate to the seat also.

Joel S

On Wed, 2 Jun 1999 09:45:49 -0700 Rich Durant <rich_durant@MENTORG.COM>
writes:
>All this talk about armrests reminds me . . .
>
>The P.O. removed the armrest from the middle passenger side seat to
>have a
>little more clearance to get to the back seat (Syncro passenger van).
>The
>arm rest and a bag of hardware have been under the back seat since I
>bought
>the Syncro and this weekend I decide to put it back on.  The armrest
>itself
>is OK, but the bag of hardware is definitely for something else . . .
>. :-(
>
>So I need the plate and shaft that the armrest rotates on, along with
>the
>two smaller allen bolts to hold it on to the seat, and the larger
>allen
>bolt that holds the armrest on to the shaft.
>
>Annybody with a trashed seat that can part this out to me?
>
>Thanks -- Rich Durant
>
>86 Syncro - "The Syncro"
>86 Westy - "The Conestoga"
>
>
>--
>Rich Durant
>Licensing & Installation Products
>Mentor Graphics Corporation

___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]