Date:         Sat, 12 Jun 1999 12:09:49 -0700
Reply-To:     Brent Christensen <bpchristensen@MINDSPRING.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Brent Christensen <bpchristensen@MINDSPRING.COM>
Subject:      Re: Camper screens
Comments: To: "Groff, Montgomery" <Montgomery.Groff@ECHOSTAR.COM>

Funny, the same thing must have happened to the PO of my Syncro.  It was all
gooped on with RTV when I got the van.  I removed all the RTV and cleaned up
the window frame and screen frame, then attached it with a strip of Velcro
that runs along the bottom edge.  Now, I can pull them off while driving and
not have to listen to than infernal whistling noise, and then pop 'em back
on when camped.  BTW, the attachment procedure is easy - top forward corner
into the slot, then push down to secure the Velcro.


Brent Christensen
'89 Syncro Westy "Klaus"
'95 Cherokee Sport

----- Original Message -----
From: Groff, Montgomery <Montgomery.Groff@ECHOSTAR.COM>
Sent: Friday, June 11, 1999 11:55 AM
Subject: Camper screens


> Well, now I've done it. I finally broke both clips off of one of the side
> window screens. Does anybody have any good tricks for keeping it in place
> sans the 'clip-holder-on-thingy'?? I've temporarily attached it using
> silicon calk, but would like to be able to remove both periodically.
>
> Monty
> '89 Westy
>