Vanagon EuroVan
Previous (more recent) messageNext (less recent) messagePrevious (more recent) in topicNext (less recent) in topicPrevious (more recent) by same authorNext (less recent) by same authorPrevious page (June 1999, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 15 Jun 1999 13:45:21 -0400
Reply-To:     "Fitz-Randolph, Douglas" <dfrandolph@TALKAM.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "Fitz-Randolph, Douglas" <dfrandolph@TALKAM.NET>
Subject:      Side Window Screens
Comments: To: BAnderso@STARBUCKS.COM
Content-Type: text/plain

Brad wrote: <<Also, any tried and true designs for building window screens to cover the side (sliding) windows? Any suggestions are appreciated, just don't tell me to trade up to a Westy! > [Brad Anderson] > 87 Vanagon Syncro>>

Here's my take on screens for the Westy impaired:

I've got a '90 Syncro - not a Westfalia - that I fabricated some screens for - they fit right into the window tracks and are held in place by closing the window on them. (They don't "cover" the windows - they "are" the windows...)

The sliding windows are 1/4" thick - about the same thickness as 1/4" plywood. I made a little wooden frame from this plywood - rounded at the front edges just like the window - about 3/4" larger in height than the window opening, and about 2" narrower in width. I then attached some aluminum window screen material to the back using silicone caulking. Next, I hot-glued two strips (vertically) to the back (square) end of the screen, and spray-painted the whole thing black.

To install, just bow the screen slightly to get it to fit into the window track top/bottom fuzzy molding, slide it forward between the fuzzy molding at the front, then close the window. The front of the window will fit between the strips on the rear of the screen. They work great and look like a factory part until you get a few inches away and see the hint of woodgrain. They are removable - in that to close the window you must remove them - but that takes all of 5 seconds per side. Big plusses for me are 1) of course they keep the bugs out, 2) I can drive with them in and 3) I can leave the windows open during the day and have at least some deterrent to passers-by reaching into the van. But then again, this is Portland, Maine - I wouldn't necessarily recommend that elsewhere.

As with the awnings I mentioned the other day - if there is any interest, I'll snap a few pics of them on my next roll of film and mail out the .jpg's.

Doug Fitz-Randolph Yarmouth, ME dfrandolph@talkam.net '90 Syncro


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.