Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (June 1999, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 16 Jun 1999 12:05:58 -0300
Reply-To:     George Nahrebecky <George.Nahrebecky@STMARYS.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         George Nahrebecky <George.Nahrebecky@STMARYS.CA>
Subject:      Re: Tinting Westy Sliding Windows
In-Reply-To:  <000401beb819$a158b0f0$c801a8c0@oradba.Infintium>
Content-type: text/plain; charset="iso-8859-1"

The guy I used had the same problem, so he took off the back of the closet (it is just thin pressboard stapled on), took out the windows, did the tinting, and left the panel for me to replace. I was grateful for the professional job, but getting the pressboard back on was tricky because there is very little clearance back there, too little to use a staple gun or hammer. I wound up drilling little holes in the edge of the panel, and using my fingers to push in small nails with thumb-tack like heads that I found at the hardware store.

George

> Yesterday I took my van to a professional window-tinting shop. This shop > has a great reputation and the owner is supposedly the 1998 East > coast tint > champion and has been voted the best tinter in Virginia for the > last 5 years > (I don't know who gives out these awards). After looking at my westy and > the sliding windows, he turned down the job. This guy was such a > perfectionist, and he said the only way he would do the job is if the side > window and the back window besides the closet was removed. Otherwise, he > couldn't guarantee that it wouldn't peel off since he couldn't > tint past the > vertial felt strip on the side windows. Even when I told him to > do the best > that he could without having to take the windows off, he said he had a > reputation to protect and he wouldn't do it unless he could do it perfect. > The closet window was simply to restricted for him to get to in > the way that > he needed to "do it right". > > The guy was definitely good, and his work is flawless. However, he is too > much of a perfectionist. Time to find a new tinter. I don't > really want to > pay for the windows to be removed just to please this guy, when I can live > with the little imperfections that he was concerned about. > > Steve > > 89 Westy >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.