Date:         Thu, 17 Jun 1999 20:15:54 -0500
Reply-To:     Darrell Boehler <midwesty@MIDWEST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Darrell Boehler <midwesty@MIDWEST.NET>
Subject:      digitool and ecu service
Content-Type: text/plain; charset="iso-8859-1"

Hi Volks,
    I wish to thank everyone for all the good words about the digitool. As I
have told people who ask about the tool it gives you no information that you
couldn't get with a hat pin in the wire / meter method.  It does however
give you the information of key engine controls via leds  and various
sensors operational voltage  status with the flip of a switch, all very
effortlessly and quickly.  I want all to realize that the way the tool is
designed it requires a short  flat ribbon cable be attached to the printed
circuit board on the ecu. One attaches the digitool to this cable to put it
into operation. This makes it necessary that the ecu be shipped to me for
installation of the cable. I make a digitool for both the digifant and for
the digijet ecus. I charge $100 for the digitool, this includes everything
except shipping charges of the ecu to me. If you desire  I can add the 22 uf
capacitor afm (air flow meter)  fix to your digitool. Just let me know you
want it added.
    I have also been repairing ecus and plan to continue. I charge $100
which includes parts, labor, and shipping back to you. If I can't find your
ecu problem I will send your ecu back to you no charge. Thanks for your
interest and I am looking forward to taking care of your ecu and digitool
needs.

Darrell Boehler
Makanda Illinois