Date: Fri, 25 Jun 1999 23:40:43 -0700
Reply-To: Karl Wolz <wolzphoto@WORLDNET.ATT.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Karl Wolz <wolzphoto@WORLDNET.ATT.NET>
Subject: Re: Audi 5000 Turbo Rims
Content-Type: text/plain; charset="iso-8859-1"
Again let me stress that I don't pretend to be an expert.
As I understood what was explained to me, there are some rims which are
centered by and supported by the lug holes, but most modern rims are
actually centered by the hubs and only marginally supported by the lugs.
This info was passed along to me by my front end guy. While he is an
excellent and honest mechanic, I do accept that he could be wrong. He
showed me some examples of the ways that wheel/hub combinations fit
together, and I could definitely see why he would try to steer folks away
from aftermarket wheels, which are supported by and centered by the lugs.
He also told me that bored out steel rims actually breaking is an uncommon
event, but it happens often enough that he didn't feel he could recommend
the practice.
As for the old bug and bus wheels, the issue here was not the size of the
hole, but the amount of reinforcement provided by the curved steel lip.
(cross section _____/ \_____ as opposed to _____ _____,
where the spaces are the center holes of the rim where the hub fits through)
Don't know if I'm making sense here or not, but the bottom line is that this
is all irrelevant if you are dealing with the thicker cross section of an
alloy rim, anyway.
Hope that helped; I know that I feel better!
Karl Wolz
----- Original Message -----
From: <JordanVw@AOL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Friday, June 25, 1999 10:47 PM
Subject: Re: Audi 5000 Turbo Rims
> In a message dated 99-06-26 01:37:05 EDT, wolzphoto@WORLDNET.ATT.NET
writes:
>
> << I am not at all an expert on such things, but I have been told by a
couple
> normally reliable sources that if you machine out the center of a steel
> wheel to the extent that you remove the curled-out lip of metal, you will
> reduce the integrity of the wheel, and with side stresses the wheel will
> tend to "oil can" a bit and will eventually fail. I don't have any idea
> what the time frame is, but this has been a concern for me and the reason
I
> didn't buy some passat (I think) wheels a while back.
> >>
>
> i've never had or heard of a problem with it. the lugs bear the weight,
not
> the hole in the middle. remember the old '70 down bus, and '67 down bug
> wheels? there was an awfully big "hole" in the middle of them, too.
>
> plus the audi turbo wheels are alloy, thicker.
>
> chris
|