Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (June 1999, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 22 Jun 1999 10:24:48 -0700
Reply-To:     "Steven X. Schwenk" <Steve@SCHWENK-LAW.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "Steven X. Schwenk" <Steve@SCHWENK-LAW.COM>
Subject:      Re: Noisy Radiator Fan
Comments: To: Brad Anderson <BAnderso@STARBUCKS.COM>
Content-Type: text/plain; charset=us-ascii

Are you sure it's not running on "High" all the time? (Assuming you have high and low speed, like I do.) The temp switch may be bad or the resistor (the coiled wire thing behind the left headlight. When mine failed and ran on high, it was noisy enough to turn heads nearby. steve

Brad Anderson wrote:

> Please help if you can... > > Ever since I rear-ended that damn Explorer (not my fault) 3 years ago, my > radiator fan has made a loud droning whenever it starts. The nose was pulled > out by the dealer body shop and the radiator was replaced, but not the fan > or cowling. Another shop took a look at it, decided nothing was touching the > blades, and that my choices were to either to buy a $300 replacement fan > motor or turn up my stereo. And so we rocked for three years. > > Well, some time ago, I inspected the cowling and found it to be disfigured, > so I straightened it as best I could with it in place, but no change. At > this time I noticed the ends of the blades were indeed worn off. > > So, a while later I pulled the whole thing down and replaced the cowling > with a clean one from a junk yard. At this time I noticed the had a slight > 'unhappy' feeling when I turned the blades by hand, but I reinstalled it > none the less. Less vibration, but still droning. > > Yesterday I replaced the fan with a beauty I pulled from a Vanagon at my > local junkyard; it sounded great, by the way, when hooked up on the bench. > But after install, the same loud droning (enough to make other drivers take > a look around). > > Am I missing something? I am reasonably sure the thing is rotating in the > correct direction, and I know its not touching anymore. I didn't mess with > the balancing weights, either. Does the position of the spare have anything > to do with it? Am I doomed to rock and annoy passerby forever. > > > [Brad Anderson] > > Noisy 87 Vanagon Syncro > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.