Date:         Fri, 25 Jun 1999 13:03:27 -0400
Reply-To:     Chuck <higray@THEGRID.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Chuck <higray@THEGRID.NET>
Subject:      what is the ignition timing procedure for 83 1/2 waterboxer
Content-Type: multipart/alternative;

I have been unsuccesfull in locating this info. in the archives. I used a tining light to set up for CA. smog test and lost 2 miles per gallon ( 16.5 mpg from 18.5 mpg.) I jumped the Idel Control Modual to time the distributor with my strobe light. as per my Bently Mannual. Any advice or referance to archive would be most apprciated.

My timing tools are a strobe with advance dial and a dwell meter.

Greg Clever.

[text/html]

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.