> It is located in the speedo housing. To get to it, sit in > the driver seat, reach over the housing to the windsheild side, and > you will feel 2 small indentationson the back side. Lift up at these > points. It will take a considerable amount of force. After it pops, the Before replacing the housing put a tiny amount of contact grease on the mating surface and from then on the cover just pops right off, and on. Credit to Debi, again. Tom Neal '87 syncro |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.