Thanks David, I'm at work now but I will try it this evening. I hope that it's the same as mine. For some strange reason, they moved all of the access holes sometime between '81 and '88. So if anyone out there has an '81 I'd still be very appreciative of a measurement. Cheers, Bob David Beierl wrote: > > At 14:25 7/13/99 -02-30, Bob Norman wrote: > >Help. > > > >I hate to do this, but I'm desperate, I need some measurements > >indicating exactly where the exterior access holes are for the water > >filler & city water hook ups. > > Bob, on my '84 US Westy the forward edge of the city connection plate is > precisely 21 in forward of the rear panel seam; the top edge is 22 13/16 > above the lower seam, measured around the curve. The next plate on mine is > the electrical connection, followed by the water fill. Each of those is > fitted almost flush to the one ahead of it (1/16 or so clearance). > > Hope that helps... > > david > David Beierl - dbeierl@ibm.net |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.