Carl, The stock position is second from top...they screwed up....we have 2 adjustments below stock and one above...but i am sure the one above is enough for all who ordered...plus could get another nnotch cut...plus can go lower than stock....plus can use lower notch with longer spriongs Glad you like 'em. i've been really sick (strep throat) and really busy, so sorry that i haven't made more progress on the springs. steve
Subject: they're here, They're here!!! Date: Fri, 9 Jul 1999 14:22:08 -0600 From: Carl Hansen <carl_hansen@ieee.org> To: Syncro Shocks - Steve <Steve@Schwenk-Law.com>
#7 and #8 fronts. They're beautifull! Steve, do you know which of the mount locations is intended for stock location?? Do I remember that it was the 2nd up?? (stock, 1 lower, 2 higher???) My drawing says that the lower edge of the front spring is 6 inches from the center of the lower mount. I guess I can figure it out from that. Guess that means I've got work to do Saturday. Ch Carl Hansen 1.612.440.2899 carl_hansen@ieee.org |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.