> Thanks for all the suggestions on how to solve my intermittent >stalling and poor running problems. One suggestion was to change the >ECU. Although this is probably the most expensive option, I happen >to have a spare ECU (the original for my 85 van which we thought was at >fault one time but was'nt whentrying to find a previous problem, the heat >sensor). Before I switch the ECU, which seems easy enough, can any >one please tell me what to watch out for? (I will buy Bentleys manual >soon). Thanks 1-Make sure that the key is off before pulling and replacing. 2-Make sure to properly screw down the bugger, there is a ground associated with it I think. Later, Dave & Sherrie Williamsburg, VA zzzzzzzzzz__ |E[__] [__]|[_]\\ | _DC&SP | _ || * * * =-( )---------( )--= |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.