On Mon, 12 Jul 1999, Rob Wilke wrote: > My Syncro has been doing the binding in tight turns for a while now and > only getting worse so, I just pulled my drive shaft out of my 87 Syncro > and the back part off the shaft came off first. I was able to roll my > van by turning the shaft by hand. So does this mean the VC is toasted. NO. under the conditions it maybe working find. > Will it hurt anything else to drive without the drive shaft in??? No I have done this for 3 years now. Has it > been established that driving without the shaft does/ does not do damage > to the VC?? Will not hurt it. > Yet another question. My clutch has been chattering, just a wee bit as > i first begin to back up and out of my driveway first thing in the > morning. (111,000 miles) How much longer do I have???? > Clutch chatter has been established to have many causes. So it would be impossible to answer this question without dismantalling.
> TIA. > > ROB > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.