Date:         Fri, 9 Jul 1999 16:10:25 -0700
Reply-To:     sxs@CONCENTRIC.NET
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Steve Schwenk <sxs@CONCENTRIC.NET>
Subject:      Syncro bilsteins
Comments: To: drillock@earthlink.net
Comments: cc: "Buettner, Peter" <PGB@dolby.com>,
          Michael Sullivan <sullivan@openmarket.com>,
          Carl Hansen <carl_hansen@ieee.org>,
          "Syncro Shocks - Ratjen, Bjorn, Ph.D." <bratjen@direct.ca>
Content-Type: text/plain; charset=us-ascii

Carl, The stock position is second from top...they
screwed up....we have 2 adjustments below stock and one
above...but i am sure the one above is enough for all
who ordered...plus could get another nnotch cut...plus
can go lower than stock....plus can use lower notch
with longer spriongs

Glad you like 'em.  i've been really sick (strep
throat) and really busy, so sorry that i haven't made
more progress on the springs.
steve


Subject:
        they're here, They're here!!!
   Date:
        Fri, 9 Jul 1999 14:22:08 -0600
   From:
        Carl Hansen <carl_hansen@ieee.org>
     To:
        Syncro Shocks - Steve <Steve@Schwenk-Law.com>


#7 and #8 fronts.  They're beautifull!

Steve, do you know which of the mount locations is
intended for stock
location??  Do I remember that it was the 2nd up??
(stock, 1 lower, 2
higher???)  My drawing says that the lower edge of the
front spring is 6
inches from the center of the lower mount.  I guess I
can figure it out
from that.

Guess that means I've got work to do Saturday.

Ch

Carl Hansen
1.612.440.2899
carl_hansen@ieee.org