Date:         Mon, 12 Jul 1999 14:54:08 -0700
Reply-To:     Stuart MacMillan <stuart@COBALTGROUP.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stuart MacMillan <stuart@COBALTGROUP.COM>
Organization: The Cobalt Group
Subject:      Re: 86 2.1 oil cooler onto a 83 1.9
Comments: To: Camcaddie@AOL.COM
Content-Type: text/plain; charset=us-ascii

I've given this a cursory look, and I can't see how to even fit a filter
in the space left between the exhaust and the cooler let alone how to
plumb it in.

Anyone out there done this with the 1.9 exhaust system on a 2.1?  Both
the plumbing and exhaust are very different on the 2.1, and if there is
a filter that fits what is it and how do you shield the plumbing from
the exhaust heat?  TIA.



Rob Rubin wrote:
>
> Here's the skinny....I had AVP rebuild my 1.9 and do their conversion
> deal.....2.1 cam/pistons/cylinders/and heads. Thinking that the oil cooler
> would be a good thing to throw on, I also ordered that.......apparently it
> fits between the oil filter and the case (easy enough). However where would
> be the best place to tie into the original 1.9 cooling system to get coolant
> to the thing? and are there any known fittings that "tee" that I could splice
> into an existing line to feed and and a line to recover the coolant, and
> which lines would those be ??
>
> Help.......................................
>
> Rob
> Wendell   -   83 westy

--
Stuart MacMillan
Manager, Case Program
800-909-8244 ext 208

Getting your share of the Net yet?
http://www.cobaltgroup.com
http://www.casedealer.com/demo
http://www.caseihdealer.com/demo