Date:         Thu, 15 Jul 1999 18:06:04 +0000
Reply-To:     "M.R. Nimmo" <mrnimmo@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "M.R. Nimmo" <mrnimmo@YAHOO.COM>
Subject:      Re: Hammock thread
Comments: To: "Henning, Eric" <Eric.Henning@bailey.com>, vanagon@vanagon.com
Content-Type: text/plain; charset=us-ascii

There was a thread earlier about adding a grab handle
on the drivers side.  Somebody made the mistake of
drilling the wires.  Proper procedure was drilling a
small hole then putting a guide wire in to hold the
wires back.  Do a search for more details.  It should
be the same procedure.  You'd still have to find the
brackets of an older westy and modify the cot.

Good luck,
Ray

--- "Henning, Eric" <Eric.Henning@bailey.com> wrote:
> Probably ok to just bolt it to the a pillar, just a
> little nervous drilling
> into it (has a wire bundle running down the inside)
>
> thanks
>
> eric
>
> >As I recall, the bracket on my 71 Westy was merely
> >bolted onto the a-pillars.
>
>

_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com