Brian Cirulnick wrote: > While doing some minor body work on my 85GL over the weekend, I spotted cracks > in the seams where the body panels meet. I first noticed the drivers side > large panel (opposite the sliding door) -- the rear part where there's the > seam, which I guess acts as a rain channel, has a crack running from 5 inches > below the window line to about 1 foot down from there. > > There's a smaller, but similar crack in the seam for the panel that's part of > the rear storage/engine bay area. > > So, here are the stupid questions: > > Is this normal/easily repairable? Can I ignore it and just get some spraypaint > and paint into the crack to prevent rust? > > or > > Do I have to get my panels re-welded in some way so that it doesn't get worse, > and I end up with a vehicle that drops pieces off on the road when I hit a > bump? > > Has anybody else ever seen or had cracks in the body seams? > > TTYL > Brian Cirulnick > techrat@vm.com > > -- > > --------------------------------------------------------------------------- > V A N G U A R D M E D I A C O R P > E-mail: techrat@vm.com URL: http://www.vm.com/ > BBS: (telnet into) bbs.vm.com:3000 --> (or dial into) 212-242-7685 > -The 'Web' is a medium. This is because it is neither rare, nor well done.- Brian, I have had the same problem. On my '80 (bought new, sold 2 yr. ago, still running great on org unopened engine with ~185,000 mi.) the same seems had developed small cracks. When I painted it with Dupont Centuari I did not seal those cracks. Big mistake. Two or three later rust started because the new paint trapped water in the old cracks. The next time I gouged out the cracked seam sealer and replaced it with 3M' s Seam Sealer. Don't remember the product number...sorry. Just go to a Automotive Paint Store and explain your mission. The 3M Seam Sealer is paintable or it can be applied to painted surfaces. Also, if rust has started (even if you can't see it, it probably has) apply Ospho, sparingly, to the cracked area. Both products come with good directions. Rust..... don't let those cracks go!! WR/ Deaner |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.