Mike Ray wrote: > > OK, Got my Porsche Wheel studs for the rear of the Vanagon > Can the studs be removed with a hammer or do I have to remove the Hub and > press them out? > Mikey, Shoot a bit of WD-40 around the base of the studs, front and back, screw a sacrificial nut onto the stud, just nearly flush with the outer end, and tap out with a hammer. You may want to remove the nut while the stud still has some grip, depending on how hard you had to "tap" it. Hope this helps, Larry |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.