Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 1999, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 9 Aug 1999 12:18:40 -0400
Reply-To:     EMZ <vw4x4@FYI.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         EMZ <vw4x4@FYI.NET>
Subject:      Re: Shear Bolts/Steering column
Comments: To: Scott Curtis <SCurtis269@AOL.COM>
In-Reply-To:  <bb7680df.24e034a9@aol.com>
Content-Type: TEXT/PLAIN; charset=US-ASCII

Vise grips. While you are in there, check the where on the clutch linkage, and replace the motor for the heater fan.

Eric 86-VW4x4 vw4x4@fyi.net 72-240z Pittsburgh, PA USA 1936-Chrysler

On Mon, 9 Aug 1999, Scott Curtis wrote:

> I'm in the process of removing the dash from my '90 Westy to clean the > ventilation system due to mice infestation, what is the best way to remove > the shear bolts from the steering column? The repair manual says to drill > out? > > Scott Curtis >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.