At 20:01 8/18/99 -0400, David Beierl wrote: actually going on. Simply adding water so that it is at least say 15" deep >in each arm, and there is at least 15" of tubing above the water in the arm >that's not connected to the gas, then applying pressure and putting a ruler >btw the upper and lower menisci is all that's necessary. Well I fell into the same hole here -- 7-8 inches of water on each arm, and the same clear in the outer arm, is plenty. The only aim is to 1) not blow the water completely out of the descending arm and 2) not overflow the ascending arm. :-/ david
David Beierl - Providence, RI '84 Westy "Dutiful Passage" '85 GL "Poor Relation" |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.