Hi list, While puttering around with the Temp Sensor II on my 87 Syncro, I noticed that a hose was disconnected from thermostat housing (top). It looks like the hose is supposed to connect to the valve that is just below and left of the Breather Valve on the housing. My valve has been broken off and a screw has been placed in the bottom end of the hose. Can someone tell me what the purpose of this hose is? Could the broken, unsealed valve on the housing be causing me any performance related problems? Thanks in advance, Jeff 87 Syncro Westie |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.