Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 1999, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 23 Aug 1999 09:31:20 EDT
Reply-To:     KENWILFY@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         KENWILFY@AOL.COM
Subject:      Re: engine do's
Comments: To: schmidt5@hsonline.net
Content-Type: text/plain; charset="us-ascii"

Jay if you are dropping the engine you mean you are taking it all the way out or just letting it hang down so that you can get to the studs better? If you are letting it hang down be sure to becareful of the heater line on the passenger side of the engine. This can be torn if there is too much stress on it. Watch it as you drop the engine. If it is under stress I would unhook it (these are fairly expensive) or you will rip it and it will cause you problems later. Been There Done That and it is no fun. Ken Wilford Van-Again John 3:16


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.