Date:         Sun, 22 Aug 1999 17:28:06 -0500
Reply-To:     Jay & Kim Schmidt <schmidt5@HSONLINE.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jay & Kim Schmidt <schmidt5@HSONLINE.NET>
Subject:      hose clamp Question
Comments: To: vanagon@vanagon.com
Content-Type: multipart/alternative;

Learning to live with water here, and I have to ask:  Are the hose clamps reuseable if removed. These are not the screw-tighten kind but look to come off by squeezing the ends with pliers. Are these workable or should I replace with the screw tighten kind. Those in question are on the large coolant hoses. TIA
Jay

[text/html]

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.