Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 1999, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 25 Aug 1999 01:30:31 -0500
Reply-To:     Marshall Ruskin <mruskin@PANGEA.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Marshall Ruskin <mruskin@PANGEA.CA>
Subject:      Re: Logo Contest / Win Vanagon Accessories & poptop renovation.
Comments: To: ThingGuy@AOL.COM
Content-Type: text/plain; charset="iso-8859-1"

This story reminds me of a job I did at my condo - I had concrete stipple in the ceiling, and I hated it.

So, after trying to remove it (impossible) I decided to fill it with drywall mud, and then sand it smooth.

Over 220 Lb of mud, and more than 80 hrs later, my ceiling was ready to be primed.

Do not try this at home!

Marshall Ruskin

>I need a cool logo for my website <snip>>Now for some good Vanagon content. Well actually, this applies to Vanagons, >but I did this to my '74 Westy. > >My poptop was not in the best condition and I didn't want to spend the big >bucks to have it professionally painted. So I sanded it down, filled the >cracks and scratches with bondo and spot putty and rolled on the paint. > >I used Rustoleum oil based paint designed for patio furniture. I've been >using this on my bumpers from a spray can, and it looks a lot like the matt >white original paint. I bought a couple of quart cans and a smooth foam >roller and went to work. > >I carefully rolled the paint on and I'm quite pleased with the results. A >pretty smooth finish with a little texture. Not bad, and much better than a >brush! > >The only problem I encountered was with trying to get all the lint and dust >off the fiberglass. Even with sanding, the fibers tend to latch on to lint. >After the first coat, I went over the paint and sanded out the dust and small >particles. The first coat sealed the fibers. If I had to do it over again, >I would have sprayed on a sandable primer first. > >Now for tomorrow, I'm installing the new custom made poptop canvas from Dawn >Smythe at PLF. (Custom contrasting color with white netting and larger >windows.) > >Steve Lashley >'74 Campmobile >'93 EV MV ><A HREF="http://eurocampers.com/">http://EuroCampers.com</A> >Importing German Side Tents, Carver Propane Heaters and other Accessories for >Bus, Vanagon and Eurovan >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.