Hi there, I'm still leaking some coolant after my recent head gasket replacement. At least some of the leak is coming from around the coolant level sensor at the primary coolant reservior tank. When the head gaskets were done, I had seen traces of coolant at this tank so I had the mechanic put on a new cap and coolant level sensor O-ring that I had ordered from Bus Depot. However, it still appears to be leaking some around the sensor area. Here's my questions - would replacing the coolant level sensor itself help to eliminate this leak? Or should I just go ahead and have the tank itself replaced? I had expected the new O-ring to stop the leaking here, but it didn't and now I'm wondering if I need a new sensor, tank, or both. Thanks in advance for your advice, Steve 89 Westy |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.